ICT Market Maker Sell Model (MMSM) — Bearish PD Array to Bullish PD Array Trading + Free PDF

Over 150 pages of knowledge coming from 8+ years of experience from Professional ICT Trader.
👉 Buy Now!The ICT Market Maker Sell Model (MMSM) is a structure for how price moves from a Bearish PD Array to a Bullish PD Array. It is very helpful because having an idea of the structure allows a trader to enter precisely with a tight stop loss.
If you are not familiar with PD arrays, the whole concept of the Market Maker Sell Model will be useless. Before diving into the MMSM you should read the ICT PD Array guide.
In this guide I walk you through the ICT Market Maker Sell Model (MMSM) — the meaning, the four components, the trade flow, profit targets, common mistakes and the free PDF download. The mirror-image setup is covered in my ICT Market Maker Buy Model.
What is the ICT Market Maker Sell Model?
The ICT Market Maker Sell Model is the behaviour of price delivery from a bearish PD array to a bullish PD array.
You have to look for the following things before an ICT Market Maker Sell Model:
(I) The higher-timeframe market structure should be bearish.
(II) The next draw-on-liquidity (or daily bias) should be pointing lower.
(III) There should be a buy program on the lower timeframe prior to the higher-timeframe PD array.
Components of the ICT Market Maker Sell Model
The Market Maker Sell Model is made up of four components, explained below.
(I) Original Consolidation refers to the consolidated range of price between two limits — the area where price built up before the model began.
(II) Engineering Liquidity refers to the buy-side move of price making higher lows that act as liquidity when price moves to the sell side.
(III) Smart Money Reversal refers to the reversal from the buy side to the sell side, when price reaches the higher-timeframe PD array.
(IV) Liquidity Hunt refers to the sweep of the old lows that were made previously during engineering liquidity, and finally the original consolidation area.

✨ Update: I've launched my ICT Trading Strategies PDF eBook! Check it out at ictpdf.com .
How to Trade the ICT Market Maker Sell Model
As mentioned above, to trade the ICT Market Maker Sell Model you first look for a bearish market structure and a next draw-on-liquidity to the downside on the higher timeframe.
After the confirmation of these steps you wait for a buy program on the lower timeframe so that price reaches the bearish PD array of the higher timeframe.
When price reaches the higher-timeframe bearish PD array, wait for bearish confirmations like a Market Structure Shift and SMT divergence.
After these confirmations of sell-side intent, you can execute a sell trade in any fair value gap when price retraces above the market structure shift level.
Your stop loss will be 10 to 20 pips above the last swing high (the high made before the market structure shift).
Step-by-Step MMSM Trade Flow
This is the exact sequence I run when setting up a Market Maker Sell Model trade.
- Confirm bearish higher-timeframe structure. Daily and H4 making lower highs and lower lows.
- Confirm the next draw-on-liquidity is below. The daily bias must point to the sell side.
- Identify the higher-timeframe bearish PD array. Order block, fair value gap or breaker block in the premium zone of the swing.
- Wait for the buy program on the lower timeframe. Price climbs into the bearish PD array, building engineering liquidity (higher lows) along the way.
- Watch for the Smart Money Reversal. Price taps the bearish PD array and stalls.
- Wait for the bearish MSS. A clean break of the most recent short-term low confirms the reversal.
- Look for SMT divergence. A correlated pair or instrument should fail to make a new high — confirming the reversal across two charts.
- Enter on the retest. Sell into a fair value gap or order block when price retraces above the MSS level.
- Set the stop. 10 to 20 pips above the swing high made before the MSS.
- Take profit at the staged targets. Old lows from the engineering-liquidity leg first, then the low of the original consolidation, then the higher-timeframe draw-on-liquidity.
Best Markets for the MMSM
The Market Maker Sell Model works on every market that the ICT methodology is applied to.
- NQ (NASDAQ futures) and ES (S&P 500 futures) — bearish daily and H4 swings produce textbook MMSM setups, especially on news-day reversals.
- GBP/USD and EUR/USD — bearish weekly bias paired with a London-killzone buy-program setup is one of the cleanest MMSM patterns on forex.
- XAU/USD (Gold) — bearish MMSM after a bullish run into a higher-timeframe order block delivers some of the largest moves on the chart.
For traders in the United States who follow the CFTC FIFO and no-hedge rules, the MMSM is most natural on NQ and ES futures (CME Group). The 09:50 NY-AM macro window often provides the smart-money reversal point inside a larger MMSM, making it a natural place to time the entry on a bearish daily.
Profit Target
For the profit target you may use the Fibonacci tool with the following settings.
| 1 | Start |
| 0 | End |
| -1 | 1st profit scale |
| -1.5 | 2nd Profit Scale |
| -2 | 1st Target |
| -2.5 | Final Target |
Draw the Fibonacci from the high of the smart money reversal to the low of the market structure shift.

Secondly, you may target old lows as profit-taking levels, with the final target being the low of the original consolidation or the higher-timeframe draw-on-liquidity.
I personally take partials at the first set of old lows, move to break-even, and let the rest run toward the original consolidation low or the next external pool.
Common Mistakes Trading the MMSM
These are the recurring mistakes I see when traders first start trading the Market Maker Sell Model.
- Trading without a bearish higher-timeframe. The MMSM only works inside a bearish daily or H4 bias. A bullish HTF pattern that looks like an MMSM is usually a continuation, not a reversal.
- Entering the SMR without an MSS. The smart-money reversal point is not the trade. The entry only triggers after the lower-timeframe Market Structure Shift confirms intent.
- Skipping SMT divergence. SMT across a correlated pair (or NQ vs ES) is a powerful filter. Without it, the model produces more false signals.
- Stop too tight. A stop parked exactly at the MSS swing often gets hunted on the second test. The 10 to 20 pip buffer above the last swing high is non-negotiable.
- One-shot profit-taking. The MMSM has staged targets — old lows, original consolidation, HTF draw-on-liquidity. Closing the whole position at the first target leaves the largest part of the move on the table.
- Trading the MMSM on a Friday. Friday-afternoon liquidity is poor and the model frequently fails to deliver to the original-consolidation target before the weekend close. I prefer Monday through Wednesday.
Final Thoughts
While using the ICT Market Maker Sell Model in trading, keep in mind that no strategy is foolproof — you should not risk all your capital on this strategy.
To mitigate your risks, always trade with a stop loss in place to keep your equity safe. The standard rule of risking 1% per trade applies here as much as anywhere.
ICT Market Maker Sell Model PDF Download
You can download below ICT market maker sell model in PDF for free. This PDF is sponsored by ICTPDF.COM.
To learn the complete ICT Trading strategy step by step, you can buy the ICT Trading PDF eBook on ICTPDF.COM.
FAQs about the ICT Market Maker Sell Model
Brief answers to the questions readers ask most often about the MMSM.
What is the ICT Market Maker Sell Model?
The MMSM is a structural model that maps how price moves from a bearish PD array to a bullish PD array. It comprises four components — original consolidation, engineering liquidity, smart money reversal and liquidity hunt — and is used to time precise sell entries.
What does MMSM stand for?
MMSM stands for Market Maker Sell Model. The mirror version is the MMBM (Market Maker Buy Model), which maps the move from a bullish PD array to a bearish PD array.
What are the four components of the MMSM?
(1) Original Consolidation — the prior range. (2) Engineering Liquidity — higher lows built during the buy program. (3) Smart Money Reversal — the reversal at the higher-timeframe bearish PD array. (4) Liquidity Hunt — the sweep of the engineering-liquidity lows and back into the original consolidation.
What confirmation do I need before entering the MMSM?
A Market Structure Shift on the lower timeframe at the higher-timeframe bearish PD array, ideally combined with SMT divergence on a correlated pair.
Where do I place the stop loss on the MMSM?
10 to 20 pips above the last swing high — the high made before the Market Structure Shift.
What are the profit targets for the MMSM?
Use the Fibonacci tool drawn from the high of the smart money reversal to the low of the MSS to stage the targets. Target the engineering-liquidity old lows first, then the low of the original consolidation, with the final target being the higher-timeframe draw-on-liquidity.
Does the MMSM work on indices and gold?
Yes — NQ, ES and XAU/USD produce textbook MMSM patterns, especially when the daily bias is bearish and the smart-money reversal lands inside the New York AM session.
What is the difference between the MMSM and the MMBM?
The MMSM is the bearish version (price moves from a bearish PD array to a bullish PD array, sweeping lows). The MMBM is the bullish version (price moves from a bullish PD array to a bearish PD array, sweeping highs). The components mirror each other.
What is the ICT 2023 model?
The ICT 2023 model is closely related to the MMSM and MMBM frameworks. The 2023 model formalises a daily template using PD arrays, killzones and the smart-money reversal sequence — the MMSM is the bearish template inside that broader framework.
Can beginners trade the MMSM?
Beginners should first master PD arrays, daily bias, market structure shift and fair value gaps. Once those four pillars are clear, the MMSM becomes a high-probability model that turns the components into a single repeatable trade.
✨ Update: I've launched my ICT Trading Strategies PDF eBook! Check it out at ictpdf.com .




Good morning Sir
I am really to find another accountant in this field. I am a year and and i am beginning to see the light . However I must admit that locating liquidity in the chart is the a problem to me.
kindly help me some material
I am in Botswana and we have lots animals for you to come and see haha
ICT HRLR & LRLR – High & Low Resistance Liquidity Run
ICT Internal and External Range Liquidity – IRL and ERL
you may read these articles and hopefully these will be helpfull
Like what Micheal j Huddleston always says, you only need adequate information for you to become a profitable traders,,,, Your notes + a few ict videos I promise you I’m winning this game
yeah, Good luck mate
I have been reading books for the past six months, and I’m still a beginner. I’ve tried to learn from books and have learned a lot, but sometimes I still get confused. For example, there were times when the price didn’t return to the demand area, and I kept waiting but then the price started rising again, and I missed the entire buying opportunity. I felt like something was missing.
Now, I’ve realized the importance of concepts like FVG and MSS, and I’ve started to understand the market better. I’ve also started reading your articles from the beginning, and I plan to read all of them. For the past week, I’ve been consistently reading your articles, and they have been really helpful.
God bless you!