ICT Sick Sister Strategy: How to Trade the Weakest Market

Over 150 pages of knowledge coming from 8+ years of experience from Professional ICT Trader.
👉 Buy Now!The ICT Sick Sister strategy is one of the lesser known but highly effective market correlation techniques taught by Michael J. Huddleston (ICT). While many traders understand SMT Divergence, the Sick Sister concept takes correlation one step further by focusing on the market that temporarily fails to keep pace with its correlated counterparts.
Instead of treating that weakness as a reason to avoid a market, ICT teaches that under the right conditions the weakest market often gives the highest probability setup. The lagging one is not broken, it is just late.
This guide explains exactly how the Sick Sister concept works, when to use it, how to trade both the bullish and bearish version, how it differs from SMT Divergence, and the mistakes that ruin it. If you are new to the building blocks, the premium and discount and liquidity guides will make the rest of this click faster.
What Is the ICT Sick Sister Strategy?
The ICT Sick Sister strategy is based on correlated markets such as:
- NASDAQ (NQ)
- S&P 500 (ES)
- Dow Jones (YM)
Normally these markets move together because they represent similar segments of the US stock market. But there are times when one market fails to make the same move as the others. For example:
- The Dow creates a lower low
- The S&P creates a lower low
- The NASDAQ fails to create a lower low
That weaker market is what ICT calls the Sick Sister. Unlike traditional SMT Divergence, the Sick Sister is not immediately expected to reverse. Instead, ICT expects it to eventually catch up after retracing into discount or premium pricing. An illustration is shown below:

Understanding Market Correlation
Correlated markets rarely move identically, but they usually move in the same overall direction. When one market becomes noticeably weaker than the others, it often signals one of two things:
- A genuine market reversal
- A temporary imbalance that will later be corrected
The Sick Sister concept is designed to catch the second scenario. Instead of assuming the weaker market will keep falling, ICT waits for it to retrace into a high probability dealing range before entering, in anticipation of the delayed move.
When Does the Sick Sister Strategy Work Best?
According to ICT, this strategy performs best during consolidating markets rather than strong trending environments. Several factors point to consolidation:
- Lack of major economic news
- Overlapping weekly ranges
- Tight price action
- Low volatility
- Sideways movement
During these conditions, markets frequently rotate between discount and premium pricing instead of trending aggressively, which is exactly what the Sick Sister setup needs. An example of a consolidating market is shown below:

Why Market Context Matters?
One of the biggest mistakes traders make is using every ICT concept regardless of market conditions. The Sick Sister setup depends heavily on context.
Imagine it is Monday morning with very little economic news scheduled until later in the week. Without strong catalysts, institutions are less likely to aggressively trend the market, so price often oscillates within established ranges. If one index temporarily underperforms the others, it does not necessarily mean weakness. It may simply be waiting for a better discount before joining the overall move. Reading this context correctly is what separates a good Sick Sister trade from a random one.
✨ Update: I've launched my ICT Trading Strategies PDF eBook! Check it out at ictpdf.com .
How to Trade Using the Sick Sister Strategy?
The process begins by comparing correlated markets. For example:
- Dow posted a higher high
- S&P posted a higher high
- NASDAQ failed to post a higher high and printed a lower high
In this case the Dow is strong, the S&P is strong, and the NASDAQ is lagging, so the NASDAQ becomes the Sick Sister. The bearish version is the mirror:
- NASDAQ posted a lower low
- S&P posted a lower low
- Dow failed to post a lower low and printed a higher low
Here the Dow becomes the Sick Sister because it refused to make the lower low the other two markets made.
Bullish ICT Sick Sister Setup
A bullish setup develops when one correlated market fails to reach the expected buy side liquidity while the others keep moving higher. Suppose the Dow breaks a previous high, the S&P also breaks a previous high, but the NASDAQ stops short and forms a lower high.
Instead of buying the NASDAQ immediately, wait for it to retrace into institutional buying areas. These include:
- Discount pricing
- A bullish Order Block
- A bullish Fair Value Gap
- OTE (the 62 to 79% Fibonacci retracement)
- Below equilibrium
Only after price trades into these PD Arrays do you start looking for confirmation. Once buying pressure returns, the objective becomes the buy side liquidity the NASDAQ failed to reach earlier. The market is not being bought because it is weak. It is being bought because it reached a discount price while still having unfinished upside objectives. A real market example is shown below:

Bearish Sick Sister Setup
The bearish model is simply the mirror image. Imagine the NASDAQ breaks a previous low, the S&P also breaks a previous low, but the Dow refuses to make the lower low. The Dow becomes the Sick Sister.
Rather than selling immediately, ICT waits for the Dow to retrace into institutional selling areas. Typical PD Arrays include:
- Premium pricing
- A bearish Order Block
- A bearish Fair Value Gap
- OTE (the 62 to 79% retracement)
- Above equilibrium
After bearish confirmation appears, the expectation is for the Dow to finally complete the move toward the sell side liquidity the other markets already reached. Again, the idea is not to sell because the market looks strong. It is to sell after institutions have repriced it into a premium while unfinished downside liquidity still exists. A real market example is shown below:

Step-by-Step Sick Sister Trade Flow
Here is the full sequence I run on every Sick Sister setup, in both directions.
- Confirm the market is consolidating. The setup works best in ranging conditions, so check for low volatility, overlapping ranges, and no major news before you look for it.
- Compare the correlated indices. Line up NQ, ES and YM and find the one that failed to make the same high or low as the other two. That laggard is your Sick Sister.
- Set the direction from the strong markets. If the others made higher highs, you are looking to buy the laggard. If they made lower lows, you are looking to sell it.
- Wait for the laggard to reach premium or discount. Do not act on the divergence alone. Wait for the Sick Sister to retrace into a discount PD Array for buys, or a premium PD Array for sells.
- Take confirmation and enter. Drop to a lower timeframe and wait for a Market Structure Shift or a fresh Fair Value Gap in your direction, then enter on the retracement.
- Set the stop and target. Place the stop beyond the PD Array you entered from. Target the exact buy side or sell side liquidity the Sick Sister failed to reach earlier, because that is the level it is expected to catch up to.
Why Premium and Discount Matter?
One of the biggest misconceptions about the Sick Sister concept is believing the divergence itself creates an entry. It does not. ICT repeatedly emphasizes that institutional traders buy at discount and sell at premium. After identifying the lagging market, you wait for price to reach a favorable dealing range before considering an entry.
- For bullish trades: discount, bullish PD Arrays, buy side liquidity objective
- For bearish trades: premium, bearish PD Arrays, sell side liquidity objective
The correlation tells you which market to trade. Premium and discount tell you where to trade it.
Sick Sister vs. SMT Divergence
| SMT Divergence | Sick Sister |
|---|---|
| Primarily identifies potential reversals. | Primarily identifies delayed continuation opportunities. |
| Focuses on disagreement between correlated markets. | Focuses on the market that temporarily lags behind. |
| Often expects the leading market to reverse. | Expects the lagging market to eventually catch up. |
| The divergence itself becomes the signal. | The divergence simply identifies which market to watch. |
| Entries are based on reversal confirmation. | Entries occur only after price reaches premium or discount PD Arrays. |
The divergence alone is not the trade. It simply tells you which market deserves your attention. From there, the premium and discount read and the liquidity objective do the real work.
Common Mistakes
A few repeatable errors turn the Sick Sister from a high probability filter into a losing trade. Avoid these.
- Trading the divergence alone. The divergence is only a clue. Without a premium or discount read, there is no high probability entry.
- Ignoring market context. The Sick Sister performs best in consolidation. Applying it blindly during every strong trend usually leads to poor results.
- Chasing price. The whole point of identifying the Sick Sister is to wait for value. Buying after a rally or selling after a decline removes the institutional edge.
- Forgetting liquidity. Every trade needs a logical liquidity objective. Without one, your exits become emotional instead of systematic.
Final Thoughts
The ICT Sick Sister concept is a unique way of reading correlated markets. Instead of chasing the market that has already made the big move, it focuses on the one lagging behind. You wait for that market to reach premium or discount, then look for a trade, expecting it to eventually catch up to the others.
The concept works in both bullish and bearish conditions. The key is to identify the lagging market first, then use liquidity, premium or discount, and PD Arrays to find a high probability entry. Used in the right conditions and combined with patience, the Sick Sister becomes a genuinely powerful tool in an ICT trader’s playbook.
Frequently Asked Questions
What is the ICT Sick Sister strategy?
It is a market correlation technique that focuses on the correlated index that temporarily fails to keep pace with the others. ICT expects that lagging market, the Sick Sister, to catch up after it retraces into premium or discount, which is where you look for the trade.
How is the Sick Sister different from SMT Divergence?
With SMT Divergence, the diverging market is often expected to reverse. With the Sick Sister, the lagging market is not broken, it is just late, and it is expected to eventually complete the move the others already made once it reaches a good price.
Which markets are used for the Sick Sister?
The classic set is the three correlated US indices, the NASDAQ (NQ), the S&P 500 (ES) and the Dow (YM). You compare their highs and lows to find the one that failed to make the same move as the other two.
When does the Sick Sister strategy work best?
In consolidating, ranging markets rather than strong trends. Low volatility, overlapping weekly ranges, tight price action, and a lack of major news are the conditions where markets rotate between premium and discount and the setup delivers.
Do I enter as soon as I spot the divergence?
No. The divergence only tells you which market to watch. You wait for the lagging market to retrace into a discount PD Array for buys, or a premium PD Array for sells, and take confirmation before entering.
Where is the target on a Sick Sister trade?
The target is the exact buy side or sell side liquidity that the Sick Sister failed to reach earlier. That unfinished objective is the level the lagging market is expected to catch up to, so it makes a logical and systematic target.
✨ Update: I've launched my ICT Trading Strategies PDF eBook! Check it out at ictpdf.com .




✨ Update: I've launched my ICT Trading Strategies PDF eBook! Check it out at ictpdf.com .